Bohler S500 for Shaper Cutters and Hobs
2022-08-19 14:14:00
jiangxingTools
2346
Bohler S500 for Shaper Cutters and Hobs
Material composition of S500: C-1.10, Si-0.50, Mn-0.20, Cr-3.90, Mo-9.20, V-1.00, W-1.40, Co-7.80
Standard: 1.3247, HS2-9-1-8, EN ISO 4957
Performance feature of Shaper Cutters and Hobs with S500:
Toughness & Ductility: good
Wear Resistance: high
Compressive strength: high
Edge Stability: high
Grindability: good
Hot Hardness (red hardness): very high
相關(guān)文章
-
Timing Pulley Hob for HTD 3M
Timing Pulley Hob for HTD 3Mtiming belt profile: HTDbelt type: 3Mcommon range: 9-15T, 16-25T, 26-80T... - Shank Type Worm Wheel Hob with Module m2
- PA20° Standard Gear Milling Cutter with Module m4
- Dry Cutting Gear Hobs
- Gear hobs for synchroflex timing belt pulleys
- Built-up Gear Hob
- PA20° Profile DIN3972 Standard Pre-grind Gear Cutting Hob with Module m1.25
